How to debug kiddie robot ride

Kiddie robot ride is one of the most popular kiddie ride in the amusement park, square, indoor playground. Do you know how to debug kiddie robot ride? When you want to get the ride debugged, in this page, Beston Rides will show you step-by-step debugging tutorial (including time, speed, volume and remote control debugging). You can also watch our debugging video.

How to debug time?

1. Press and hold the time setting button for 4–5 seconds.
2. After seeing the light flash on the screen.
3. If you need to increase the time, just press the increase button on the upper left.
4. If you need to reduce the time, press the decrease button on the upper right.
5. For example, if you want to set 8 minutes, just adjust the screen date to 8 minutes.
6. After debugging the time, click the time button to save it.

How to debug the speed?

1. Press the middle speed button on the left.
2. After seeing the numbers displayed on the small screen in the middle.
3. If you need to increase the speed, press the increase button on the upper left.
4. If you need to slow down the speed, press the decrease button on the upper right.
5. Note: The highest speed is 20 gears, the minimum speed is 1 gear, and the normal factory setting is 10 gears.
6. After adjusting the speed, press the speed button to save it.

How to debug the Volume?

1. Press and hold the volume setting button for 4–5 seconds.
2. After seeing the light flashing on the small screen in the middle.
3. If you need to increase the volume, press the increase button on the upper left.
4. If you need to reduce the volume, press the decrease button on the upper right.
5. The smaller the value, the softer the sound. The larger the value, the louder the sound.
6. After adjusting the volume, click the volume button to save.

How to debug the remote control?

1. Press and hold the remote control setting button for 4–5 seconds.
2. When slow flash on the big screen at the top screen, press the remote control setting button again and a fast flash appears.
3. Take out the remote control and press the vehicle you want to debug.
4. For example, when debugging vehicle A, after pressing A on the remote control, the screen will display the numbers, and then pressing A again will complete the debugging.

Then we will finish the debugging process for the kiddie robot ride. It can be put into operation now! If you want to know more about how to operate the amusement rides that you had purchased from Beston Rides, welcome to contact us, our sales manager and engineer will happy to solve your problems.

Contact Us

    Customize Your Park Solutions

    Contact us now by filling in the form below.

    Project Tips:

    1. What is the schedule for the whole project? (New project procurement, Upgrade and renovation, Understanding research)

    2. Which rides do you prefer? (product name, capacity, quantity, etc.)

    3. Is the land approved? Are the funds ready?

    Name

    * :

    Email*:

    Phone/Whasapp*:

    Country:

    Company:

    Project Type:

    Landing Size:

    Your Budget:

    Your Inquiry:*

    *We respect your privacy, and will not share your personal informationg with other entities.